Asher was the best choice I have made. We love the outcome of the ADU . They showed up on time and did a great job, were friendly. No issues at all during the whole process. Very organized team . I would recommend them to everyone I know !
Two different projects, two different prices
The short answer
A jetted (whirlpool) tub installed in an existing bathroom typically runs $2,500–$7,500, averaging about $4,000, before any surrounding tile or vanity work. Converting that same tub space to a walk-in shower instead typically runs $1,500–$15,000, averaging about $3,000 for a basic swap and $6,000–$15,000 for a fully custom, ADA-style roll-in shower. “Jacuzzi” is itself a brand name – one whirlpool-tub maker, not a category – which is part of why cost pages for a “Jacuzzi bath remodel” are really pricing a jetted tub.
Jetted tub installed
Keep the tub, add water or air jets and the plumbing/electrical to run them. $2,500–$7,500 typical.
Tub-to-shower conversion
Remove the tub, waterproof and tile a curbless or low-threshold shower in its place. $1,500–$15,000 depending on scope.
Full bathroom remodel
Either fixture choice inside a gutted bathroom – new floor, vanity, lighting. Priced as a remodel, not a fixture swap.
Tub, jets, and the hookup
What a jetted tub actually costs
Angi’s 2026 cost data splits jetted tubs by how they create the massage: water jets push water through nozzles and need more plumbing, while air jets push bubbles through a thinner line. Water-jetted tubs run about $1,200–$8,500 for the tub plus $800–$2,500 to install; air-jetted tubs run about $1,000–$6,000 for the tub plus $700–$2,000 to install. A dedicated electrical circuit, GFCI protection and a service panel so the pump can be reached later are part of that install cost, not optional extras.
Typical installed cost, 2026 (midpoint of published range)
Angi cost data
That last bar is the point: a “Jacuzzi bath remodel” usually means a jetted tub from any brand, including Jacuzzi® itself, which is one manufacturer’s trademark, not a generic term for a jetted or soaking tub.
A safety question, not just style
Why so many owners convert the tub instead of upgrading it
The CDC’s review of emergency-department data found an average of about 234,000 nonfatal bathroom injuries treated in U.S. emergency departments each year among people 15 and older, with the injury rate rising sharply with age. More than a third of those injuries happened while bathing, showering, or getting in or out of the tub or shower, and 81% of all bathroom injuries were falls.

A jetted tub does not change that calculation: stepping over a tub wall is still the higher-risk move, whether or not the tub has jets. A curbless or low-threshold walk-in shower removes that step entirely, which is the main reason the comparison matters before spending on jets. See our aging-in-place remodeling guide for the broader set of changes (lighting, flooring, door widths) worth planning alongside a shower conversion.
From a basic swap to a full ADA-style shower
What a tub-to-shower conversion costs
Angi’s 2026 data puts a basic tub-to-shower conversion at $1,500–$15,000, averaging about $3,000, with the range driven by whether the existing plumbing and framing can be reused. A standard 36×36 in. accessible shower runs about $1,300–$5,500, while a fully custom roll-in shower with a built-in bench and grab bars – waterproofing and drain work included – runs $6,000–$15,000.
Tub-to-shower conversion cost, 2026 (midpoint of published range)
Angi cost data

Removing the only tub in a home can affect resale if the home has no other bathtub, so a conversion is usually sized to the household’s own bathrooms, not a blanket rule. Our bathtub-to-shower conversion and walk-in shower conversion service pages cover the waterproofing and framing steps in more detail; our ADA and accessible bathroom remodel page covers the roll-in shower case.
An Elbaz Construction project
One tub-to-shower conversion, start to finish
Before
- A standard tub-shower combination, tiled in marble-look porcelain
- A step over the tub wall to get in or out
- Fixed shower height, no seating
After
- A curbless walk-in shower with a frameless glass screen
- No step – the shower floor opens directly off the bathroom floor
- A grab rail fixed to the tiled wall

Full remodel budget context
When the fixture is the smaller part of the job
If the tub or shower is one piece of a larger, worn-out bathroom – old tile throughout, a failing vanity, dated lighting – pricing it as a fixture swap understates the real project. Cost vs Value 2025 puts a mid-range full bathroom remodel at $25,609 in the South Atlantic region (tub/shower, tile, vanity, toilet and fixtures replaced). See our bathroom remodel ROI guide for what that project recovers at resale, in this region, before deciding whether a fixture swap or a full remodel is the right scope.
Interactive checklist
Jetted tub or shower conversion: how to decide
Either path, done right
What we do
Elbaz Construction installs jetted tubs and converts tubs to walk-in showers across Miami-Dade, Broward and Palm Beach, including the waterproofing membrane and linear drain work a shower conversion depends on, and the dedicated electrical circuit a jetted tub needs.

Tell us which bathroom you are working with and we will walk through what each path involves on your layout, before we talk about price.











